Introduction
Brass press fittings have revolutionized plumbing installations with their innovative press-connect technology. These high-performance fittings combine the strength of dezincification-resistant brass with precision-engineered sealing systems to create reliable, permanent connections in seconds. Designed for use with copper, stainless steel, and multilayer pipes, brass press fittings eliminate the need for soldering while providing superior leak protection.
Key Benefits
- Time-Saving Installation
- No flame or solder required
- 75% faster than traditional methods
- Immediate system pressurization
- Reduced labor costs
- Engineered Reliability
- DZR brass construction (CW602N)
- Dual EPDM sealing rings
- Vibration-resistant connections
- Consistent performance from -20°C to 110°C
- System Flexibility
- Wide range of configurations
- Compatible with multiple pipe materials
- Suitable for water and gas applications
- Available in sizes from 15mm to 108mm
Technical Specifications
Material Standards
- Body: EN 12165 CW602N brass
- Seals: NSF-approved EPDM
- Press rings: 316 stainless steel
Performance Ratings
- Working pressure: 16 bar at 65°C
- Burst pressure: 80 bar minimum
- Certifications: WRAS, NSF/ANSI 61, DVGW
Common Configurations
- Couplings
- Elbows (90° and 45°)
- Tees (equal and reducing)
- Adapters (press x thread)
Professional Installation Guide
Pre-Installation
- Verify pipe/fitting compatibility
- Inspect O-rings and seating surfaces
- Cut pipe squarely and deburr
- Mark insertion depth (3mm past stop)
Pressing Procedure
- Fully insert pipe into fitting
- Align press tool perpendicularly
- Complete full crimp cycle
- Verify uniform indentation
Quality Control
- Visual inspection of crimp marks
- Pressure test at 1.5x working pressure
- Check for proper alignment
Maintenance Best Practices
Annual Inspection
- Check for corrosion
- Verify seal integrity
- Test joint stability
Troubleshooting Guide
| Issue | Cause | Solution |
|---|---|---|
| Minor leak | Incomplete crimp | Re-press connection |
| Seal failure | Damaged O-ring | Replace fitting |
| Corrosion | Chloride exposure | Install protective sleeve |
Conclusion
Brass press fittings offer plumbing professionals an optimal combination of installation speed and long-term reliability. Their innovative design eliminates traditional joining challenges while delivering maintenance-free performance that meets the most stringent system requirements. When properly installed using manufacturer-recommended tools and techniques, these fittings provide decades of trouble-free service in residential, commercial, and industrial applications.
IFAN factory started in 1993. And IFAN has workshop 120000 square meter with 610 staff. IFAN can design and produce all plumbing pipe and fitting include PPR,PVC,CPVC PPSU HDPE PEXA PEXB PERT pipe and fitting ,brass fitting, brass ball valve ,heating system , gas system , sanitary faucets and hose, In the past 30 Years, IFAN has never forgotten his mission-To protect health and safety. And IFAN factory use best materials to produce high quality pipe and fittings with automatic production line and high tech quality control machines. The most important,IFAN can guarantee that all pipes and fittings manufactured by IFAN are qualified. More information pls feel free contact us Whatsapp.